As HİDROLİKSAN Manufacturing Co . We are one of the exporter  and producer  of all kind of hydraulic presses .Our company founded  in 1980 by Halim USTA  and  His brother  at the city of Konya /TURKEY. Hidrolliksan factorie’s  fabric’s closed area  is 5000 m²  and total area is  10.000 m².

Our company  exports its products  to many overseas clients and clients from Germany, Netherland, Belgium, England, Saudia Arabia, Tunsia, Morocco and others. Our products are devolopped by our technical team. In addition we give importance improvement, develop hydraulic technology and join all activities all around the world.

Our products are  as below;

Forming Presses                                 Ironing Presses

C type Presses                                   Multi purposes cold Presses

Hot cauthchouc Presses                      Cauchchouc Presses

Coif forming Presses                           Scrap packing Presses

Workshop Presses                              Hydraulic Press

The hydraulic press continues to be the press of choice for today's modern manufacturers. The advantages of the hydraulic press versus mechanical presses is being realized and utilized by more and more manufacturers. Today's modern hydraulic presses provide; Performance, Reliability, and Unlimited Capability in almost any application. Stamping, Punching, Blanking, Drawing, Bending, ..... All standard press designs and circuits can be configured to match even the most non-standard press requirements. A hydraulic press is powered by a hydraulic pump to a hydraulic cylinder or cylinders that drive the slide. Hydraulic presses allow for job parameters such as travel distance, force and return position to be easily configured for a variety of jobs within a single press. Various levels of sophistication are available from simple mechanical switches to digitally programmable control. This flexibility yields a hydraulic press's greatest advantage.

A hydraulic press is a hydraulic mechanism for applying a large lifting or compressive force. It is the hydraulic equivalent of a mechanical lever, and is also known as a Bramah press after the inventor, Joseph Bramah, of England. He invented and was issued a patent on this press in 1795. As Bramah (who is also known for his development of the flush toilet) installed toilets, he studied the existing literature on the motion of fluids and put this knowledge into the development of the press.[1] Hydraulic presses are the most commonly-used and efficient form of modern press. Principle The hydraulic press depends on Pascal's principle: the pressure throughout a closed system is constant. At one end of the system is a piston with a small cross-sectional area driven by a lever to increase the force. Small-diameter tubing leads to the other end of the system. Pascal's law: Pressure on a confined fluid is transmitted undiminished and acts with equal force on equal areas and at 90 degrees to the container wall. A fluid, such as oil, is displaced when either piston is pushed inward. The small piston, for a given distance of movement, displaces a smaller amount of volume than the large piston, which is proportional to the ratio of areas of the heads of the pistons. Therefore, the small piston must be moved a large distance to get the large piston to move significantly. The distance the large piston will move is the distance that the small piston is moved divided by the ratio of the areas of the heads of the pistons. This is how energy, in the form of work in this case, is conserved and the Law of Conservation of Energy is satisfied. Work is force times distance, and since the force is increased on the larger piston, the distance the force is applied over must be decreased.

Note: İf you want to buy  a different  hydraulic presses  please sent us your technical details.We can produce  all kind of different hydraulic presses in accordance with our customers wishes.